Engine's, injection, valve's, timing, crank's etc..
Moderators: Dan J , Diesel Dave , Crazymanneil , Stuart
SUMO
Been here a while now..
Posts: 44 Joined: Mon Nov 12, 2007 9:09 pm
Location: london / halifax
Contact:
Post
by SUMO » Wed Nov 14, 2007 6:30 pm
anyone tell me what else these things were in?
i am after a 3 cyl charade motor for my project - proving to be more than a little illusive...
can anybody tell me what else [if anything] they were fitted in to help widen my search some?
i am told they were in a hijet for a few years also but thats not working for me either
any other vehicles they were in that anyone knows of? or a simliar engine for that matter?
thanks all - this is just the start of the questions - you just wait till its all layed out in the garage
thanks all
Diesel Graham
Been here a while now..
Posts: 43 Joined: Mon Oct 01, 2007 10:40 pm
Location: Tewkesbury, Gloucestershire
Post
by Diesel Graham » Wed Nov 14, 2007 11:06 pm
just wondering if you've seen the Aixam diesel cars? their 500cc diesel twin might lend itself to motorcycle use, they are common on ebay.
Enfield Taurus Greaves - running well now!
Lohmann 18cc - undergoing restoration
SUMO
Been here a while now..
Posts: 44 Joined: Mon Nov 12, 2007 9:09 pm
Location: london / halifax
Contact:
Post
by SUMO » Thu Nov 15, 2007 9:58 am
nope - not seen them - worth a look into
from a very quick google search looks like a 2 cylinder kubota engine about 13HP
im going to do some sums with gear ratios but that doesnt sound an awfull lot
Diesel Graham
Been here a while now..
Posts: 43 Joined: Mon Oct 01, 2007 10:40 pm
Location: Tewkesbury, Gloucestershire
Post
by Diesel Graham » Thu Nov 15, 2007 12:22 pm
You're right, 13hp doesn't sound like a lot, but I thought it might be a more compact size and if it takes a car up to 50 mph, then maybe 70 on a bike is possible?
Enfield Taurus Greaves - running well now!
Lohmann 18cc - undergoing restoration
TimppaX
I luv the smell of Diesel...
Posts: 117 Joined: Mon Oct 01, 2007 7:48 am
Location: Finland
Contact:
Post
by TimppaX » Thu Nov 15, 2007 3:51 pm
Aixam runs over 100km/h if injection linkages are is allowed to work full.
I Once had short talk with gyus who import them...
that should do it
reg hardlyrideables
Been here a while now..
Posts: 15 Joined: Sat Oct 06, 2007 7:05 am
Location: Aldershot england
Contact:
Post
by reg hardlyrideables » Fri Nov 16, 2007 9:33 pm
you just missed 2 daihatsu engines on ebay complete car for 60 quid and a complete running engine and all parts for engine to run 100 quid i was thinking of getting one of them but im gonna stick with my 3 cyl watercooled lister engine but i got a hard job fixing some sort of gearbox to it
SUMO
Been here a while now..
Posts: 44 Joined: Mon Nov 12, 2007 9:09 pm
Location: london / halifax
Contact:
Post
by SUMO » Sat Nov 17, 2007 10:21 am
bugger
dont suppose you were watching them so you could send me the auction number? might not have sold so could do a deal...
gilburton
I luv the smell of Diesel...
Posts: 761 Joined: Sat Apr 21, 2007 11:35 am
Location: UK northants
Post
by gilburton » Wed Dec 12, 2007 4:34 pm
currently on ebay(uk)110204772900
ebay(australia)280182797535
but be warned daihatsu spares in the UK are expensive although some consumables,head gaskets etc. are available from other sources
Stuart
Site Admin
Posts: 2227 Joined: Fri Dec 01, 2006 9:08 pm
Location: Horsham West Sussex, England
Contact:
Post
by Stuart » Wed Dec 12, 2007 9:40 pm
I had to get three glow plugs for the Daihatsu Charade engine a few years back and was told they were cheaper here than on the continent.
Stuart. M1030M1, Honda NC700S, Grom!, Toyota Corolla 1.4 Turbo Diesel. Favouring MPG over MPH.
gilburton
I luv the smell of Diesel...
Posts: 761 Joined: Sat Apr 21, 2007 11:35 am
Location: UK northants
Post
by gilburton » Thu Dec 13, 2007 1:24 pm
I used to have a hijet diesel(what a disaster) injector units cost £1000 the set and nobody wanted to work on it although this was a completely different engine to the charade:?
SUMO
Been here a while now..
Posts: 44 Joined: Mon Nov 12, 2007 9:09 pm
Location: london / halifax
Contact:
Post
by SUMO » Thu Dec 13, 2007 1:44 pm
went for a d950 - all sorted
cheers for the help all