1974 suzuki gt750?

Bodywork, Engine Mounting, Frames, Sub Frames, Forks, Suspension etc..

Moderators: Dan J, Diesel Dave, Crazymanneil, Stuart

Post Reply
Paradox1559
Been here a while now..
Posts: 24
Joined: Sun Apr 15, 2018 8:25 pm
Location: Ohio, u.s.a.

1974 suzuki gt750?

Post by Paradox1559 » Wed Apr 25, 2018 5:52 pm

Alright, here goes something. I just found 2 complete motorcycles without title for $500.
They are both 1974 suzuki gt750 (who'da thunk)
The engine on this bike is:
*2215mm/87.2in, long
*864mm/34in, wide
*1125mm/44.3in, high

My kubota zb600c-1 is:
*482.6mm/19in, long
*431.8mm/17in, wide
*558.8mm/22in, high (with integrated radiator)

On paper, it looks like my motor would fit with limited modification, with plenty of room to spare.
But because I like to over think, I would love the opinion of some of my more versed builders here.

Note: the other bike will be restored to working condition.

sbrumby
I luv the smell of Diesel...
Posts: 516
Joined: Sun Dec 10, 2006 8:35 pm
Location: STAFFORDSHIRE ENGLAND

Re: 1974 suzuki gt750?

Post by sbrumby » Thu Apr 26, 2018 7:23 am

I would start by buying a new tape measure.
Sam

Paradox1559
Been here a while now..
Posts: 24
Joined: Sun Apr 15, 2018 8:25 pm
Location: Ohio, u.s.a.

Re: 1974 suzuki gt750?

Post by Paradox1559 » Fri Apr 27, 2018 12:55 am

Yeah, I got the wrong measurements

pietenpol2002
I luv the smell of Diesel...
Posts: 755
Joined: Wed Dec 05, 2007 6:56 pm
Location: Goshen, IN USA

Re: 1974 suzuki gt750?

Post by pietenpol2002 » Fri May 01, 2020 12:01 am

We're gonna hang in there with you Paradox. Just get back to us when you purchase that new tape measure.

But, first things first. Any hope of getting titles in Ohio? It's otherwise all for naught. Unless of course you know someone next door in Indiana.............
Ron
Goshen, IN USA

Post Reply